4.3.3.5.
Arcs
Under
the menu item Calculate > Setting Out > Arcs you can determine an arc
between two points depending on the radius. The coordinates necessary for a
stake out can be ascertained with different settings and saved.
The
arc points can be entered via point number or by clicking the point in the
graphic. In addition, the radius of the arc must be specified.
The
calculation of the points to be set can relate either to the Chord
of the two arc points or to the Tangent
of the first point on the arc.
The
button <Option> enables
different ways of determining the coordinates to be staked out.
In the above example, the distance of the coordinates in relation to the
chord amounts to 5m. The values set are accepted by pressing <OK>.
The result can be protocolled by pressing the
button <Print>. The coordinates to be set
out can be saved as coordinates on the arc by pressing the button <Save
Arc> or as footpoints by pressing <Save
Footpnt>.